HXY4606 30V Complementary MOSFET
Description
The HXY4606 uses advanced trench technologyMOSFETs to provide
excellent RDS(ON) and low gatecharge. The complementary MOSFETs may
be used toform a level shifted high side switch, and for a host
ofother applications.
N-CH Electrical Characteristics (TA=25℃unless otherwise noted)
A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The
value in any given application depends on the user's specific board
design.
B. The power dissipation PD is based on TJ(MAX)=150°C, using ≤ 10s junction-to-ambient thermal resistance.C.
Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C. Ratings are based on low frequency and duty cycles to keep
initialTJ=25°C.
D. The RθJA is the sum of the thermal impedence from junction to lead RθJL and lead to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using
<300µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-ambient thermal
impedence which is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, assuming a maximum junction
temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
N-Channel: TYPICAL ELECTRICAL AND THERMAL CHARACTERISTIC
P-Channel Electrical Characteristics (TJ=25°C unless otherwise
noted)
A. The value of RθJA is measured with the device mounted on 1in2
FR-4 board with 2oz. Copper, in a still air environment with TA
=25°C. The
value in any given application depends on the user's specific board
design.
B. The power dissipation PD is based on TJ(MAX)=150°C, using ≤ 10s
junction-to-ambient thermal resistance.
C. Repetitive rating, pulse width limited by junction temperature
TJ(MAX)=150°C. Ratings are based on low frequency and duty cycles
to keep
initialTJ=25°C.
D. The RθJA is the sum of the thermal impedence from junction to
lead RθJL and lead to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using
<300µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-ambient thermal
impedence which is measured with the device mounted on 1in2 FR-4
board with
2oz. Copper, assuming a maximum junction temperature of
TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER
MARKET. APPLICATIONS OR USES AS CRITICALCOMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY
LIABILITY ARISINOUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS.
AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,FUNCTIONS AND
RELIABILITY WITHOUT NOTICE.
P-Channel: TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
